dxny

Product Performance

Hello, come to consult our products !
Brand Chemical composition% density g/cm3 hardness HRA Bending strength N/mm2 compressive strength  N/mm2 Grain size μm Recommended sorties Performance characteristics
WC Co+Ni+Cr etc
F3620 94 6 15.0  89.0  1940 4300 1.6-2.4 Finish mill stand / small size hard wire The conventional brand uses CO + Ni + CR binder, which has good comprehensive mechanical properties, hot crack resistance and corrosion resistance
F3630 92 8 14.7 87.0  2100 3400 1.6-3.2 TMB double module mill reducing sizing unit
F3640 90 10 14.3 87.0  2200 3400 1.6-3.2 Finished stand / front stand of finishing mill
F3660 85 15 13.9 85.5 2300 3500 2.0-3.2 Back frame of finishing mill
F3670 82 18 13.6 84.5 2350 3500 2.0-3.2 Pinch unit
F3675 80 20 13.5 83.5 2400 3400 2.0-3.2 Front frame of finishing mill
F3676 76 24 12.9 81.5 2400 3300 2.0-3.2 Front frame of finishing mill / rolled stainless steel
F3680 77 23 13.2 82.0  2400 3300 2.0-4.0 Pre finishing mill
F3660A 85 pureCo 15 13.9 85.5 2300 3500 2.0-3.2 Finishing mill rear frame / rolled stainless steel
F3680A 77 pureCo 23 13.2 82.0  2400 3300 2.0-4.0 Finishing mill / screw rack
F3620N 94 6 14.9 88.5 2500 4200 2.0-6.0 Finishing mill stand / small scale hard wire rolling   N series brand    adopts extra coarse grain structure and composite adhesive, which has good strength and anti fragmentation performance
F3640N 90 10 14.4 86.5 2600 4000 2.0-6.0 TMB double module mill reducing sizing unit
F3660N 85 15 13.8 85.5 2800 3500 2.0-6.0 Back frame of finishing mill
F3675N 77 23 13.2 83.5 2700 3400 2.0-6.0 Front frame of finishing mill
F3676N 74 26 12.5 82.5 2650 3300 2.0-6.0 Finished thread stand of finishing mill
F3680N 92 8 14.6 89.0  2000 4200 2.0-4.0 Finished stand / front stand of finishing mill T series brand         with rare earth elements has excellent wear resistance
F3630T 90 10 14.1 86.0  2200 4000 2.0-4.0 TMB double module mill reducing sizing unit
F3640T 85 15 13.2 85.0  2400 3500 2.0-4.0 Back frame of finishing mill
F3660T 75 25 12.8 84.0  2300 3400 2.0-4.0 Front frame of finishing mill
F3675T 70 30 12.4 83.0  2200 3300 2.0-4.0 Pre finishing mill / front frame of finishing mill